locomotive
A powered railroad vehicle that pulls train cars; equipped with powerful traction motors, weighs hundreds of thousands of pounds, and has wheels with extremely small contact areas with rails
As defined in Why Locomotives Can Pull So Much
Other definitions
The powered engine unit at the front of a train, with a long service life.
Union Pacific: Long Train Runnin’
Where it comes up · 2
Most important claims · 10 of 10Search all claims for “locomotive” →
- When a train comes to a complete stop, the static friction from hundreds of wheels makes it extremely difficult for locomotive engines to get everything moving, despite the extremely low rolling friction between cars and rails.Why Locomotives Can Pull So Much
- It would be near impossible for a locomotive to pull an entire train at once from a dead start because the combined static friction would be too great, but if the locomotive starts by pulling just one car at a time and gradually adds weight, then a single SD40-2 locomotive can pull miles worth of rail cars.Why Locomotives Can Pull So Much
- The contact area between the top of the rail and the bottom of train wheels is only about the size of a dime, creating a very low friction environment that allows locomotives to pull massive loads.Why Locomotives Can Pull So Much
- Draft gears allow locomotives to overcome static friction one car at a time, which is why a single locomotive can pull thousands of tons of rail cars as if it were nothing.Why Locomotives Can Pull So Much
- Draft gears are located behind each coupler on a train and allow weight to be added gradually by letting the coupler slowly move in and out of a large sleeve, enabling locomotives to overcome static friction one car at a time.Why Locomotives Can Pull So Much
- The ability of locomotives to pull enormous loads is a combination of: overcoming static friction by adding weight gradually, taking advantage of extremely low rolling friction, and using exceptionally powerful traction motors.Why Locomotives Can Pull So Much
- Locomotives are equipped with some of the most powerful traction motors on the market, which provide immense torque necessary to overcome friction and pull trains.Why Locomotives Can Pull So Much
- A typical SD78s locomotive weighs 428,000 pounds with 12 points of contact with the rails, meaning each wheel's contact area bears approximately 35,500 pounds of weight.Why Locomotives Can Pull So Much
- Building rail track costs about 75,000 dollars per mile, while new locomotives cost two to three million dollars each and have roughly 40-year lives.Union Pacific: Long Train Runnin’
- A person can move a single rail car or locomotive nearly unaided due to the extremely low friction between rail equipment and rails, though this is dangerous and should not be attempted.Why Locomotives Can Pull So Much