load
An electrical device or component that consumes electrical power, such as a motor, heating element, light bulb, or appliance; the component through which current is intended to flow in a normal circuit.
As defined in What is the Difference Between a Short Circuit and a Ground Fault?
Where it comes up · 2
- What is the Difference Between a Short Circuit and a Ground Fault?6 claims
- The Prospects for Active Management1 claim
Most important claims · 7 of 7Search all claims for “load” →
- Resistance measurement cannot distinguish between a short circuit and a ground fault when the ground wire, neutral wire, and hot wires are the same length, because all conductors have identical resistance per unit length and thus yield the same ohm reading regardless of which wires are shorted together.What is the Difference Between a Short Circuit and a Ground Fault?
- Testing at multiple points in a circuit—panel, junction boxes, load—using continuity testing allows a technician to systematically narrow down the exact location of a short or ground fault without opening or dismantling appliance components.What is the Difference Between a Short Circuit and a Ground Fault?
- In a properly functioning appliance circuit with the load off, there should be no continuity between ground and neutral, even though they are bonded at the service, because the testing loop needs to be completed through the load.What is the Difference Between a Short Circuit and a Ground Fault?
- A short circuit is a condition where power does not take its intended path through the load but instead finds a shortcut, bypassing the load entirely before returning to the source.What is the Difference Between a Short Circuit and a Ground Fault?
- When testing for continuity in a de-energized appliance circuit, there should be no continuity between hot and neutral, between the two hots (in a 240-volt circuit), or between hot and ground, because the load (motor, heating element, etc.) is not yet energized and thus not providing a closed path.What is the Difference Between a Short Circuit and a Ground Fault?
- Once a load is energized, a complete circuit is formed through the load (motor coil, heating element, etc.), and there will be continuity between the appropriate conductors because the load itself provides the continuous path.What is the Difference Between a Short Circuit and a Ground Fault?
- Morningstar's star rating is a backward-looking, risk- and load-adjusted measure versus category peers and should be used only as a starting point for research, not as a complete evaluation.The Prospects for Active Management