anode
The positive electrode in an electrolyzer where oxidation occurs and oxygen is produced
As defined in Why Hydrogen DOES Have a Future
Where it comes up · 2
- ABYC Online Education "Huddle": Discussion and Review of Popular Technical Topics with Mike Bonicker5 claims
- Why Hydrogen DOES Have a Future1 claim
Most important claims · 6 of 6Search all claims for “anode” →
- Hysata's capillary-fed electrolyzer works by using a reservoir at the bottom of the cell which keeps the electrolyte away from both the anode and cathode until it's drawn through a porous separator, allowing electrolyte to keep direct contact on only one side while gases are produced without bubbling action that hinders efficiency, and as water is electrolyzed out of the separator, capillary action naturally draws up more water to replace it, keeping everything running smoothly.Why Hydrogen DOES Have a Future
- The biggest cause of corrosion on outboards and stern drives is lack of maintenance of the anodes, exacerbated by a misunderstanding that these engines were not originally designed for boats that stay in the water continuously; aluminum requires anode protection and coating to keep aluminum exposed to water, not just anti-fouling coating.ABYC Online Education "Huddle": Discussion and Review of Popular Technical Topics with Mike Bonicker
- Most modern bow thruster units are completely sealed without oil reservoirs, eliminating the need to check oil levels or inspect for seal leaks, unlike older or larger units which have oil drain plugs and reservoirs positioned above the waterline.ABYC Online Education "Huddle": Discussion and Review of Popular Technical Topics with Mike Bonicker
- Bow thruster maintenance is minimal and primarily involves monitoring anodes (zinc or other sacrificial metal) for wear, checking for oil leaks on older units with oil reservoirs, and visually inspecting for corrosion; the anodes are the number-one maintenance item.ABYC Online Education "Huddle": Discussion and Review of Popular Technical Topics with Mike Bonicker
- For an outboard that is trimmed up but the lowest tip remains submerged in the water, the best practice is to leave the outboard low enough so at least the lowest anode is in the water, then manage biofouling through periodic cleaning rather than risking corrosion from an unprotected submerged portion.ABYC Online Education "Huddle": Discussion and Review of Popular Technical Topics with Mike Bonicker
- Corrosion protection options for outboards are strictly anodes only, while stern drives typically use a combination of anodes and an impressed-current cathodic protection system (e.g., Mercathode for Mercury, equivalent systems for Volvo); impressed-current systems use battery power to actively protect the metal in addition to passive anode protection.ABYC Online Education "Huddle": Discussion and Review of Popular Technical Topics with Mike Bonicker