What this covers

This short tutorial introduces the MOSFET as the most widely used voltage-controlled field-effect transistor, following an earlier lesson on the JFET. The narrator is not identified. After explaining the name (Metal Oxide Semiconductor Field Effect Transistor), the video covers the three pins, Gate), Drain) and Source), using a faucet analogy in which the gate acts as the valve that governs flow between the other two. It also distinguishes N-Channel from P-Channel devices by the direction of controlled current and by where the positive supply connects.

The middle of the video is about ratings and why they matter. It compares MOSFETs with BJT and JFET transistors, which typically handle under 1A, and cites datasheet figures for two parts: the IRFZ44 at 49A and 55V, and the IRF540 at 23A and 100V. The high input resistance at the gate is presented as the reason a MOSFET can be driven from an Arduino without drawing current from it.

The practical examples come next. In one motor-speed circuit, a potentiometer varies gate-to-source voltage and so modulates drain current. In another, a microcontroller's PWM signal sets speed through duty cycle. Protective resistors appear in both circuits, one guarding the potentiometer and one guarding the microcontroller against reverse current. The video also notes that a constant 5V source can trigger a MOSFET. Boost converters get a brief treatment, where amplification depends on kHz-level switching, which is why MOSFETs and Schottky diodes are preferred over ordinary silicon diodes.

The closing section deals with handling. High currents generate heat, so MOSFETs are fixed to heatsinks, and because they are sensitive to static electricity they are usually used as integrated driver modules. These modules bundle the resistor and MOSFET connections with signal, load and supply terminals. The narrator adds that large motor-fan systems work on the same principle as the small DC motor demonstration.

Sharpest takeaway

MOSFETs are voltage-controlled transistors that enable efficient high-current and high-voltage switching in power electronics circuits, with practical applications in DC-DC converters and motor control requiring thermal management and driver modules for reliable operation.

  • MOSFETs can switch much larger currents (up to 49A) and voltages (up to 100V) than BJTs or JFETs
  • Gate voltage controls drain-source current, enabling applications from simple potentiometer speed control to microcontroller-based PWM control
  • MOSFETs require heatsinks for thermal dissipation and are typically integrated into driver modules to protect against static electricity damage

The claims · ranked23 claims · weighted by value

This asset isn't compiled yet

You're seeing its claims, ranked. Compile it to build the argument threads, weight them, and check each claim against your library — the full view.

0.74

The Gate pin in a MOSFET functions analogously to the valve in a faucet, controlling current flow between Drain and Source pins, which functions analogously to water flow direction in the faucet.

definitionhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“We can compare the structure of the MOSFET to a faucet, as in all transistors. We can think of the Gate pin, where the trigger is made, as the valve of the faucet, and between the Drain-Source, where the current passes, as the direction in which the water flows in the faucet.”

0.74

MOSFET driver modules integrate required resistor and MOSFET connections, consolidating microcontroller signal input, load power connection, and module power supply connections into a single package to ease circuit integration.

factualhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“Thanks to these modules, MOSFET connections can be made easily in the circuit. Thus, ease of use is also ensured. For example, Microcontroller, motor and power supply connections can be made easily when the MOSFET is not a stand-alone MOSFET Driver Circuit module, as is the case here. When we look inside this module, we see the circuit here. The MOSFET Driver Circuit module is formed by combining the required resistor and MOSFET connections. Thus, the Digital Signal Input, Load connection and power connection to be connected to the Microcontroller are gathered on a module to provide ease of use.”

0.70

MOSFETs are sensitive to static electricity damage and therefore are typically used as integrated driver modules rather than standalone components in circuits.

factualhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“Since MOSFETs are easily affected by static electricity and due to the resistor used with it, they are generally used as driver modules, not alone in the circuit.”

0.70

In a potentiometer-based motor speed control circuit, the potentiometer varies the voltage applied between Gate and Source pins of the MOSFET, which controls the gate voltage and thereby modulates the Drain current that drives the motor.

causalhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“Now, when we change the resistance value of the potentiometer here, a voltage will be applied between the Gate-Source of the MOSFET. With this voltage, the MOSFET will be triggered and the current coming out of the positive (+) pole of our power supply will flow between the Drain-Source pins of the MOSFET by following the path we have shown with the arrows, and our motor will rotate with this current. As the trigger voltage will change by increasing or decreasing the resistance value of the potentiometer, the Drain current will change and the speed of the motor will change according to this current.”

0.70

A resistor connected to the Source pin of the MOSFET in microcontroller circuits provides protection against reverse current that may otherwise damage the microcontroller.

causalhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“Here, the resistor connected to the Source pin of the MOSFET provides protection for the reverse current that may come to the Arduino microcontroller.”

0.70

MOSFETs and Schottky diodes are preferred in converter circuits over normal silicon diodes because they can respond to the high-frequency switching speeds required in these applications.

normativehigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“In this way, MOSFET and shockly diodes are preferred in order to obtain healthier results instead of using normal silicon diodes in order to respond to high frequency switching speeds in converter circuits.”

0.70

A resistor connected between a potentiometer and the MOSFET Gate pin protects the circuit by reducing the intensity of reverse current that may otherwise damage the potentiometer.

causalhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“The reason for connecting a resistor between the potentiometer and the MOSFET is that a reverse current in the MOSFETs does not damage the circuit elements connected to the Gate pin. Thanks to the resistor here, the intensity of that current is reduced. Thus, the circuit devices connected to the Gate pin are not damaged.”

0.70

MOSFETs can be controlled using microcontroller-generated PWM signals, which modulate motor speed by adjusting the duty cycle of the square wave signal.

factualhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“With MOSFET, we can control the speed of a motor not only with a potentiometer, but also with a microcontroller as here. Since the resistance value on the Gate pin of the MOSFET transistors is very large, there is no current flow. That is, the trigger part and the part connected to the load are isolated from each other. As such, MOSFET can be easily used with a microcontroller such as Arduino. Thanks to the 5V square wave received from the PWM signal output of the Arduino, speed control can be done easily. According to the duty value of this signal, that is, by adjusting the expansion and contraction of the signal, we can make the motor rotate fast or slow.”

0.66

MOSFETs can control much larger currents (close to or exceeding 1A, up to 49A in the case of IRFZ44) and voltages (up to 55V for IRFZ44, 100V for IRF540) compared to BJT and JFET transistors, which typically control currents under 1A.

factualhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“While currents close to 1A and under 1A can be controlled with BJT and JFET transistors, much larger currents can be controlled with MOSFET transistors. We can see this by looking at the datasheet of some MOSFET transistors. E.g; When we look at the datasheet information of the very widely used IRFZ44 MOSFET, there is information that current can be controlled up to a maximum current of 49A. This current value is really a great value. In addition, a maximum voltage of 55V can be controlled with this MOSFET. When we look at the datasheet of IRF540 MOSFET, another widely used MOSFET, there is information that a maximum current of 23A can be controlled and a maximum voltage of 100V can be controlled with it.”

0.66

In N-Channel MOSFETs, controlled current flows from Drain to Source, while in P-Channel MOSFETs, controlled current flows from Source to Drain, with the positive pole of the voltage source connected to Drain in N-Channel and to Source in P-Channel.

factualhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“The direction of the controlled current in N-Channel MOSFET is from Drain to Source, while the direction of controlled current in P-Channel MOSFET is from Source to Drain. In other words, while the positive(+) pole of the voltage source is connected to the Drain pin of the MOSFET in N-Channel MOSFET, the positive(+) pole of the voltage source is connected to the Source pin of the MOSFET in P-Channel MOSFET.”

0.66

In DC-DC Boost Converter circuits, the amplification process depends on the switching speed of the MOSFET, which typically operates at high-frequency values in the KHz level.

causalhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“For example, you see a DC-DC Boost Converter here. The circuit diagram for this is basically the same as here. The amplification process is according to the switching speed of the MOSFET located here. Triggers are made at high frequency values at the KHz level.”

0.66

DC-DC converters and motor drivers using MOSFETs generate significant heat because very high current flows through them, necessitating thermal management through heatsinks.

causalhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“DC-DC converters and motor drivers using MOSFETs naturally get hot because very high current flows through them. As such, they need coolers.”

0.66

A MOSFET can be triggered (turned on) using a constant 5V voltage source; the MOSFET will be triggered above 5V but not triggered at voltages below 5V.

factualhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“We can also control the motor by connecting a power supply that provides a constant 5V voltage instead of a potentiometer. While the MOSFET is triggered above 5V, it is not triggered at the voltage below.”

0.66

The high input resistance at the MOSFET Gate pin creates electrical isolation between the gate control input and the load, enabling safe integration with microcontrollers like Arduino without current draw from the microcontroller.

causalhigh valueestablishednovelty 1/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“Since the resistance value on the Gate pin of the MOSFET transistors is very large, there is no current flow. That is, the trigger part and the part connected to the load are isolated from each other. As such, MOSFET can be easily used with a microcontroller such as Arduino.”

0.34

MOSFETs are field-effect transistors that operate with voltage control, distinguishing them from current-controlled transistors.

definitionestablishednovelty 0/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“MOSFETs are the most widely used field-effect transistors that operate with voltage control.”

0.34

MOSFETs in circuits are typically fixed to heatsinks to dissipate the heat they generate during operation.

factualestablishednovelty 0/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“We usually see MOSFETs in circuits as fixed to heatsinks that will dissipate the heat like you see here.”

0.34

The abbreviation MOSFET stands for Metal Oxide Semiconductor Field Effect Transistor.

factualestablishednovelty 0/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“The abbreviation of MOSFET comes from the initials of the Metal Oxide Semiconductor Field Effect Transistor words.”

0.34

MOSFETs have three pins: Gate (G), Drain (D), and Source (S), with the same pin naming convention as JFETs but potentially different physical locations depending on the model.

factualestablishednovelty 0/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“MOSFET also has three pins. As in JFET, one of them is Gate, the other is Drain, and the last is Source. Pin names are the same in MOSFET as in JFET. Their order is not always like this. Locations may vary depending on the model.”

0.34

The working principle of systems with large electric motor fans controlled by MOSFETs is the same as in the small DC motor speed control example demonstrated.

factualestablishednovelty 0/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“As here, the working principle of systems with big electric motor fans is the same.”

0.34

MOSFETs are widely used in power electronics circuits and many other electrical and electronics applications due to their voltage control capability and superior current/voltage ratings.

factualestablishednovelty 0/4durability 4/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“This is the basic structure and working principle of MOSFET, which is used in power electronics circuits and many other electrical and electronics circuits, friends.”

0.29

IRFZ44 MOSFET can control a maximum current of 49A and a maximum voltage of 55V according to its datasheet.

factualestablishednovelty 0/4durability 3/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“When we look at the datasheet information of the very widely used IRFZ44 MOSFET, there is information that current can be controlled up to a maximum current of 49A. This current value is really a great value. In addition, a maximum voltage of 55V can be controlled with this MOSFET.”

0.29

IRF540 MOSFET can control a maximum current of 23A and a maximum voltage of 100V according to its datasheet.

factualestablishednovelty 0/4durability 3/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“When we look at the datasheet of IRF540 MOSFET, another widely used MOSFET, there is information that a maximum current of 23A can be controlled and a maximum voltage of 100V can be controlled with it.”

0.29

The wide range of current and voltage control capabilities available with MOSFETs increases their attractiveness compared to other transistor types (BJT and JFET).

normativeestablishednovelty 0/4durability 3/4· Unidentified Speaker — What is a MOSFET? How MOSFETs Work? (MOSFET Tutorial) [DLd5dUychY8]

“The fact that a wide range and much greater current and voltage control can be achieved with MOSFET increases the attractiveness of MOSFET compared to other transistors.”