through-hull fitting
A fitting that passes through the hull of a boat, typically with hoses and clamps attached, used for seawater intake, drain discharge, or other through-hull applications
As defined in ABYC Online Education "Huddle": Discussion and Review of Popular Technical Topics with Mike Bonicker
Where it comes up · 1
- ABYC Online Education "Huddle": Discussion and Review of Popular Technical Topics with Mike Bonicker3 claims
Most important claims · 3 of 3Search all claims for “through-hull fitting” →
- Through-hull fittings and seacocks are required to pass a 500-pound load test per ABYC standards, likely because a person falling from above would generate forces far exceeding body weight, creating a safety margin against structural failure.ABYC Online Education "Huddle": Discussion and Review of Popular Technical Topics with Mike Bonicker
- Backing plates for through-hull fittings are required when flanged seacocks must be bolted to the hull per ABYC rules; they are typically composite fiberglass plates bonded to the inside of the hull to provide attachment points without drilling additional through-holes, or older installations may use threaded machine screws on the exterior that are sealed and hidden under bottom paint.ABYC Online Education "Huddle": Discussion and Review of Popular Technical Topics with Mike Bonicker
- Marlon FRP (fiber-reinforced plastic) through-hull fittings eliminate underwater metal corrosion issues and are particularly beneficial for aluminum hulls and carbon fiber structures, where they avoid galvanic corrosion problems; they meet specific marine standards and are not simple hardware-store plastic fittings.ABYC Online Education "Huddle": Discussion and Review of Popular Technical Topics with Mike Bonicker