pipeline register insertion
Splitting a logic path with a register to shorten per-stage delay and increase clock frequency, trading area for speed.
As defined in Dwarkesh Patel Podcast - Reiner Pope – Chip design from the bottom up
Where it comes up · 1
Most important claims · 3 of 3Search all claims for “pipeline register insertion” →
- Driving clock speed very high by inserting many pipeline registers (e.g. an AND gate plus register in a tight loop hitting 5-6 GHz) is counterproductive because almost all area then goes to synchronization/registers rather than logic; throughput equals work-per-clock (area efficiency) times clocks-per-second, so over-pipelining gives low latency but low throughput.Dwarkesh Patel Podcast - Reiner Pope – Chip design from the bottom up
- Logic that feeds back on itself (a loop, such as a running sum that adds a number every clock cycle) cannot be naively pipelined, because inserting a register in the middle changes the computation — splitting it into separate sums of even and odd inputs — so these loops, which all chips have somewhere, are the hardest constraint and ultimately set the clock cycle.Dwarkesh Patel Podcast - Reiner Pope – Chip design from the bottom up
- Splitting a cloud of logic in half with a pipeline register lets you hit roughly twice the clock frequency at the cost of an extra register (more storage); inserting these registers is a huge, semi-automated part of chip design and is a pure trade-off between clock speed and area.Dwarkesh Patel Podcast - Reiner Pope – Chip design from the bottom up