milliwatt
A unit of power equal to one-thousandth of a watt; used to measure relatively small amounts of power output from photobiomodulation devices
As defined in Understanding Red Light Dose I Chapter 5
Where it comes up · 1
Most important claims · 8 of 8Search all claims for “milliwatt” →
- Distance from the light source is a critical variable: light power decreases substantially as distance increases because photons are deflected and scattered by molecules in the air. A 178 milliwatt surface irradiance drops to approximately 89 milliwatts at 6 inches away and further drops to approximately 45 milliwatts at 12 inches away.Understanding Red Light Dose I Chapter 5
- Power is measured in watts or milliwatts; a milliwatt is one-thousandth of a watt. Companies often tout total watts by summing the wattage of all bulbs on a device, but this total number is not meaningful without considering the area over which that power is distributed.Understanding Red Light Dose I Chapter 5
- Approximately 90% of light is lost after the first centimeter of tissue depth due to reflection and scatter; only 10% of light penetrates past the first centimeter, and only 10% of that 10% (or 1% of original) penetrates to the third centimeter of depth.Understanding Red Light Dose I Chapter 5
- For a panel at 178 milliwatts per square centimeter surface irradiance positioned 6 inches away (delivering 89 milliwatts per square centimeter to skin), the dose is 890 millijoules per square centimeter at 10 seconds, 5,340 millijoules per square centimeter (5.34 joules) at 60 seconds, and 53,400 millijoules per square centimeter (53 joules) at 10 minutes (600 seconds).Understanding Red Light Dose I Chapter 5
- In a worked example, a panel with 100 bulbs at 2 watts each (200 watts total) and dimensions of 45 cm × 25 cm (1,125 cm²) yields an irradiance of approximately 0.178 watts or 178 milliwatts per square centimeter at the device surface.Understanding Red Light Dose I Chapter 5
- For a pad at 25 milliwatts per square centimeter applied directly to skin for 1 second, the dose is 25 millijoules per square centimeter; for 10 seconds the dose is 250 millijoules per square centimeter; for 60 seconds the dose is 1,500 millijoules per square centimeter; and for 10 minutes (600 seconds) the dose is 15,000 millijoules per square centimeter or 15 joules per square centimeter.Understanding Red Light Dose I Chapter 5
- A pad or helmet at 25 milliwatts per square centimeter placed directly on the skin (zero distance) loses very little power through air scatter and remains nearly as powerful as a 178 milliwatt per square centimeter panel positioned 6-24 inches away, despite the apparent 7-fold difference in surface irradiance.Understanding Red Light Dose I Chapter 5
- Full-body panels typically provide 178 milliwatts per square centimeter at the device surface, while pads or helmets provide much lower irradiance of 10-30 milliwatts per square centimeter.Understanding Red Light Dose I Chapter 5