Peltier element
A solid-state cooling device that uses semiconductor junctions to move heat from one side to the other when DC voltage is applied, creating temperature differences without mechanical moving parts in the cooling mechanism itself.
As defined in Thermoelectric cooling: it's not great.
Where it comes up · 1
Most important claims · 10 of 10Search all claims for “Peltier element” →
- Managing the heat rejection from a Peltier element requires a finned heat sink bonded to the hot side and a fan to force air across the heat sink, adding mechanical complexity and noise despite the common marketing claim that Peltier devices have 'no moving parts.'Thermoelectric cooling: it's not great.
- Peltier elements are technically heat pumps and can be measured with a coefficient of performance, but their COP varies dramatically with temperature difference and current applied, and in practical operating conditions the COP is between 0 and 'very bad' (approaching 0), compared to vapor-compression heat pump COP of 1-3, explaining their fundamental unsuitability for general cooling applications.Thermoelectric cooling: it's not great.
- The more electrical current driven through a Peltier element, the more internal heating it generates in the semiconductor material, which degrades efficiency independent of the temperature difference effect.Thermoelectric cooling: it's not great.
- Peltier elements have no mechanical moving parts and are not orientation-sensitive, so they can be operated in any orientation immediately without waiting for oil settling, making them suitable for portable applications where orientation is unpredictable.Thermoelectric cooling: it's not great.
- Vapor-compression refrigeration systems are 'bulky and mechanically complex affairs' with environmental issues stemming from refrigerants, making them the conventional approach that people question whether Peltier elements should replace.Thermoelectric cooling: it's not great.
- Well-meaning people periodically 'discover' Peltier elements as an alternative to vapor-compression refrigeration with the regularity of a predictable cycle, suggesting a persistent misconception that devices with no moving parts are inherently superior to mechanical systems despite opposite efficiency reality.Thermoelectric cooling: it's not great.
- Peltier-based personal fridges are manufactured cheaply (costing less than $3 per Peltier element) and marketed with the expectation that consumers will buy them impulsively despite their poor performance, exploiting the tendency to purchase inexpensive products without careful evaluation.Thermoelectric cooling: it's not great.
- A Peltier element has two sides: one cold side (which provides cooling) and one hot side (which becomes very hot), and both effects exist simultaneously—the device moves heat from the cold side to the hot side, concentrating heat energy in a small space.Thermoelectric cooling: it's not great.
- Peltier elements are semiconductor junctions that produce cooling when DC voltage is applied across them, a phenomenon called the Peltier effect discovered by Jean Charles Athanase Peltier in 1834.Thermoelectric cooling: it's not great.
- Peltier-based heating/cooling cupholders are a real automotive application where Peltier reversibility is useful, but this niche application has not been widely adopted despite being technically feasible, suggesting limited practical demand even for specialized use cases.Thermoelectric cooling: it's not great.