Passive House
An ultra-low-energy building standard originating in Germany that achieves dramatic energy savings (sometimes up to 90%) through stringent requirements for insulation (high R-values/low U-values), airtightness (ACH50 ≤0.6), triple-glazed windows, and mechanical ventilation with heat recovery. Buildings meeting the standard use minimal heating/cooling energy.
As defined in Why Do American Homes Suck?
Where it comes up · 1
- Why Do American Homes Suck?9 claims
Most important claims · 9 of 9Search all claims for “Passive House” →
- European windows are known for their high performance, particularly triple-glazed glass in tilt-and-turn frames that open inward and provide a strong seal, with several European manufacturers meeting the stringent requirements set by the Passive House Institute in Germany, which can result in up to 90% energy savings and year-round comfort.Why Do American Homes Suck?
- Building codes clearly make a difference in energy efficiency outcomes, as demonstrated by the correlation between strong codes and adoption of Passive House standards.Why Do American Homes Suck?
- Triple-glazed windows are not unheard of in the U.S., and the windows of Matt Ferrell's new home were made in the U.S. and nominally close to Passive House standards in quality, though clean comparisons are difficult due to differences in testing methods and the U.S. insistence on using imperial units.Why Do American Homes Suck?
- According to Passive House Institute founder Wolfgang Feist, by 2006 between 6,000 and 7,000 Passive Houses had been constructed in Germany, demonstrating the scale of adoption in that country.Why Do American Homes Suck?
- There is a correlation between the popularity of Passive Houses and well-developed, comprehensively applied energy codes, as evidenced by countries with the most Passive House certifications (France: 439, U.K.: 206, Germany: 532) also ranking highest on the ACEEE's energy efficiency scorecard.Why Do American Homes Suck?
- The Passive House standard requires maximum air changes per hour (ACH50) of 0.6 or less—less than one air change per hour—making it far more stringent than building codes in the 2021 IECC, Washington state, Canada, or the U.S. Department of Energy's Zero Energy Ready Home standard.Why Do American Homes Suck?
- By the mid-1980s, Sweden and Denmark had already implemented construction standards requiring compliance with low-energy standards in new buildings, and the Passive House movement began its research in 1988, with the initial prototype house in Germany still standing and occupied since 1991.Why Do American Homes Suck?
- Within the U.S., it is widely believed that energy efficiency is always a luxury, despite the cost savings demonstrated by renewables and systems like Passive House standards.Why Do American Homes Suck?
- Matt Ferrell's walls have an R-value of 35, equivalent to a U-value of 0.029, which is slightly above the Passive House standard for cool climates of about 0.026.Why Do American Homes Suck?