OSB (oriented strand board)
A modern engineered wood product made from broken-down wood strands bonded with adhesive, used as structural sheathing in walls; more moisture-sensitive than solid wood
As defined in Mold and Rot on a BRAND NEW HOUSE - What went wrong?
Where it comes up · 1
Most important claims · 10 of 10Search all claims for “OSB (oriented strand board)” →
- The corner with minimal overhang and fascia-to-fascia junction developed severe water damage: water ran down the facade, encountered the non-fully-adhered house wrap, and penetrated behind it, causing blackening and deterioration of OSB that in a six-month-old house resembles 20-year-old damageMold and Rot on a BRAND NEW HOUSE - What went wrong?
- OSB (oriented strand board) is a moisture-sensitive material that will deteriorate rapidly if it cannot dry, unlike older solid wood that had air flow through wall cavities even in houses with no insulationMold and Rot on a BRAND NEW HOUSE - What went wrong?
- A house with a one-to-one-and-a-half foot overhang had no water problems on the OSB, even when covered with the inferior house wrap, because the large overhang protected the facade from water exposureMold and Rot on a BRAND NEW HOUSE - What went wrong?
- David Nicastro articulates the principle: 'if it can't dry it's gonna die', which accurately describes what happened to the OSB in this cornerMold and Rot on a BRAND NEW HOUSE - What went wrong?
- OSB can deteriorate from black staining and flaking within just six months when moisture cannot dry, even though the house is brand new, never lived-in, showing the accelerated damage timeline in modern sealed constructionMold and Rot on a BRAND NEW HOUSE - What went wrong?
- The builder correctly laced three-sided flashing around windows and cut the house wrap at a 45-degree angle, flapping it up and applying peel-and-stick to the OSB, but failed to install sill pans, which is a critical detailMold and Rot on a BRAND NEW HOUSE - What went wrong?
- Luma Flash is a zero-perm product with no vapor permeability, meaning no drying occurs through it, but this limitation would have prevented the stucco leak problem in the corner because full adhesion prevents water from running behind the material even with cuts or tears, localized the problem instead of spreading damage down to gradeMold and Rot on a BRAND NEW HOUSE - What went wrong?
- Jordan created a testing apparatus using the actual house wrap from the house, stapled to OSB with a paper towel behind it, with two fastener conditions: a regular staple and a cap staple that breaks capillary actionMold and Rot on a BRAND NEW HOUSE - What went wrong?
- Water pressurized through a backpack sprayer immediately penetrated the house wrap without a staple, penetrated easily with a staple, but showed markedly reduced penetration with a cap staple, though still some water reached the OSB after a few seconds of water pressureMold and Rot on a BRAND NEW HOUSE - What went wrong?
- Luma Flash is a fully-adhered product: a primer is applied first, then the sticky backing of the material is applied to the primed wall, creating a bond similar to applying Formica countertops where both surfaces are tacky and create an inseparable bondMold and Rot on a BRAND NEW HOUSE - What went wrong?